Comments
-
anyone hear anything new on this from Sonicwall? I have not open a case and need to.
-
anyone hear anything new on this from Sonicwall? I have not open a case and need to.
-
I am using the mobile connect on a Microsoft Surface Laptop 7. Most the time when I go to connect, I get an error "Failed to read socket." If I try to reconnect several more times, it eventually connects. Somethings I seems like I need to try 10 or more times. Anyone else see this?
-
My issue might be i ran out of IP addresses. I had my DHCP from .70 to .120. I increased it from .120 to .210. I have a bunch of static up to .60 and from .226 to .244. Many of my statics are old devices (cameras or AP) and I can probably delete (or update to the newer device). At one point I was assigning all IP Cams and…
-
Thanks. I am not sure how to do that and need to figure out. I just had another device the same thing. It seems to be uses who were once on the network and came back. AThis time it was an iphone.
-
I installed 7.0.1-5161 this morning on my TZ670. I have not added rules in years. I just tried added and deleting a test rule and I did not get an error.
-
I have the new TZ670 up and running as the main unit. The old unit is still running. Both have cloud backups on. for the new unit, I see the daily cloud backups for both units. Is this normal that I see the cloud backups for the other unit. It does show which serial number the backup is for. I see this on the unit and also…
-
I did another factory reset of the new device (figuring it is easy enough to do) and then chose manual configuration. I then chose to import the EXP. After the import on reboot with the new EXP, I had to login in again on the device with mysonicwall credentials. The Device Name was the old device name that I had as default…
-
The new device came with 7.0.1-5111. After the initial setup and registration, I updated to 7..0.1-5151. The only change in I made on the new box was new password and turned off auto download of update. Do I need to do any further factory reset or just import the EXP file? After the EXP import and reboot, is that it and…
-
I decided to go with the promotional upgrade and get the new TZ670. My current TZ670 is on 7.0.1-5111. I was planning on upgrading to 7.0.1-5151 (latest 7.01). I may do that today. I am not sure what the new TZ670 came with (not listed on box). Assuming it is 7.0.1, is it recommended to stay on 7.0.1 for now or just go…
-
Thanks. So if the new unit comes with 7.1.1 and I want to go to 7.1.1, can I just update the old unit to the same current 7.1.1 and export the configuration and import it in the new one? Also, if the new unit comes with 7.1.1 and I want to go to 7.0.1 can I just factory reset the new unit and update (or downgrade) to…
-
thanks. I am still on SonicOS 7.0.1-5111-R4251. Been holding off on 7.1.1. I need to update to the latest 7.0.1 but have not had issues for a while. For a swap, is it just setup and activate the new one and then import the settings using an export of the old one? Should I make sure both are on the same FW version, meaning…
-
on my case with 5095, support noted per the logs, the "Firewall Reboot is due to DP-engine similar to issue reported on GEN7-37134, this has been fixed on latest version 7.0.1-5111 version" The 5111 Release Notes lists GEN7-37134: "GEN7-37134 Under some conditions, the Content Filtering Service (CFS) DNS reply handling and…
-
I updated to 7.0.1-5111 and will post if I get any reboots. This one took longer that others to update.
-
I just got another random reboot. Anyone try the 7.0.1-5111?